Small Board For Arduino Due
$ 300.00Board for Arduino Due (not included ) with 5 Digital Input at 24V, 5 Digital Output at 24V (MOSFET), 1 PWM Output at 5V,1 Analog Input at 0-10V or 4-20 mA, 1 MODBUS RS485 Port, 1 HMI Nextion Output (dedicated), 2 Stepper Motor Outputs at 5V, 1 Serial Outputs, 24V DC Power Supply. All Inputs and outputs have indicated LED.
Big Board For Arduino Due
$ 400.00Board for Arduino Due (not included ) with 15 Digital Input at 24V, 15 Digital Output at 24V (MOSFET), 4 PWM Output at 5V, 5 Analog Input at 0-10V or 4-20 mA, 1 MODBUS RS485 Port, 1 HMI Nextion Output (dedicated), 4 Stepper Motor Outputs at 5V, 2 Serial Outputs, 1 Relay Output (1 NO and 1 NC), 24V DC Power Supply. All Inputs and outputs have indicated LED.
Nextion Intelligent HMI Touch Display
$ 215.00Nextion is a Human Machine Interface (HMI) solution combining an onboard processor and memory touch display with Nextion Editor software for HMI GUI project development. Nextion HMI display connects to peripheral MCU via TTL Serial (5V, TX, RX ,GND) to provide event notifications that peripheral MCU can act on. The Intelligent Series products have more powerful hardware in terms of MCU, Flash storage and SRAM compared with Basic Series and Enhanced Series. The audio, video and animation play functions enriches user’s project HMI interaction.
Automatic Pump Filler
The XproPump 4H is an automatic filling machine. It has 4 sanitary pumps made of stainless steel and driven by servo motors. This machine made of stainless steel has indexing gates driven by sensors that allow the customer to operate this machine fully automatic. Flow meter sensors placed on each nozzle give the machine very high precision on each one of the nozzles, with +/- 1 ml on each one of the filling process. A 15 gallon tank attached to the machine with a level sensor as well as a 8ft conveyor are part of this automatic filling machine.
Pump Station
Sanitary Pump station, controlled by servo motor. Sanitary pump made of stainless steel.
PT100 Temperature Transmitter
$ 20.00Measuring rang: 0 to 150°C, Output: 4-20m, Working voltage: DC 24V, Accuracy: plus or minus 0.2 percent FS, Dimensions: 45mm Diameter: 1.77inch, Material: plastic, Weight:25g, Package content: 1 x Temperature Transmitter
Keyence Digital Pressure Sensor
$ 800.00The Keyence Digital Pressure GP-M Sensor is designed for both hydraulic and pneumatic applications. It has high environmental resistance, is clog resistant, and offers multiple adapters/fittings. This series monitors air/gas and liquid with a detectable range from -14.50 to 5,802 PSI. Control and analog outputs are available.
Sanitary Stainless Steel Pump
$ 3,000.00 – $ 3,500.00It’s a sanitary gear Pump, made of stainless steel and food grade teflon, this pump is easy to clean.
Gearbox 50:1
$ 1,550.00Technical Parameter: Rated Input Speed: 3000 rpm, Max. Radial Force: 1300N, Max. Axial Force: 1100N, Operating Temp.: -25ºC – 90ºC, Ma. Input Speed: 6000rpm, Weight: 5.0 Kg, Max. Efficiency: 92%, Motor Power: 750W, Gear Precision Grade: 6GB/T10095-2008
Sanitary Pneumatic Two Ways Ball Valve
$ 180.002 way tri clamp of 1.5 inches ball valve with the pneumatic actuator. Made of stainless steel 316.
Single Pump Filler
The XproPump-SH is a single head filling machine, with a sanitary pump moved by a servo motor, allowing you to have full control in every step of the filling process. This machine has an extremely accuracy and consistency, very easy to clean and very friendly with the user, allowing you to manipulate it at his best without advanced knowledge of mechanics. Made of Stainless Steel
Xinje Servo Motor + Driver
$ 1,099.00AC Servo Motor Voltage 220V; Rated output 750W; Rated Rev 3000RPM; Rated Torque 2.39N.M; Model MS5S-80STE-CS02430B-20P7-S01; Matched Driver DS5L-20P7-PTA. All Inputs and outputs have indicated LED.